A. A. Abdul Abass, D.
Study The Effect of Fruit Juice Extract Helianthus Tuberosus on Liver Function and as Antibacterial Agent [Volume 35, 1C, 2017, Page 214-226]
A. AbdulJabbar, I.
Hybrid Metaheuristic Technique Based Tabu Search and Simulated Annealing [Volume 35, 2B, 2017, Page 154-160]
A. Abdullah, H.
Alumina Nanoparticle/Polypyrrole Coating for Carbon Steel Protection in Simulated Soil Solution [Volume 35, 9A, 2017, Page 943-949]
A. Abdulsattar, A.
Seepage Analysis through an Earth Dam (KHASA-CHAI Dam) as a Case Study [Volume 35, 2A, 2017, Page 172-181]
A. Abed, M.
Study The Effect of Fruit Juice Extract Helianthus Tuberosus on Liver Function and as Antibacterial Agent [Volume 35, 1C, 2017, Page 214-226]
A. Ajeel, S.
Corrosion Behavior of Anodized Pure Zinc in Sea Water [Volume 35, 9A, 2017, Page 961-969]
A. Al-Aish, Thair
Design and Simulate a New Defense System of Free Electron Laser DSFEL [Volume 35, 2B, 2017, Page 166-172]
A. Anaee, R.
Alumina Nanoparticle/Polypyrrole Coating for Carbon Steel Protection in Simulated Soil Solution [Volume 35, 9A, 2017, Page 943-949]
A. Ati, Ali
Improve the Process of Enhancing Oil Recovery (EOR) by Applying Nanomagnetic Cobalt Ferrite Nanoparticles [Volume 35, 9A, 2017, Page 872-877]
Abbas, A. K.
A Survey Using Kano Model and Road map to issues Standard Model of e-commerce Using SPLE technique [Volume 35, 2B, 2017, Page 132-143]
Abbas, K.H.
Welding procedures of Turbine Blades by Using ER 309L Austenitic Filler Wire [Volume 35, 1A, 2017, Page 68-75]
Abbas, L.K.
Effects of Ambient Temperature and Needle to Collector Distance on PVA Nanofibers Diameter Obtained From Electrospinning Technique [Volume 35, 4A, 2017, Page 340-347]
Abbas, L.K.
Study the Effects of Nano-Materials Addition on Some Mechanical Properties of Cement Mortar [Volume 35, 4A, 2017, Page 348-355]
Abbas, R.H.
Copper Oxide NPs: Synthesis and their Anti-Dermatophyte Activity against Trichophyton rubrum [Volume 35, 3A, 2017, Page 276-281]
Abbas, S.A.
Effect of Re-vibration Process on Axial Capacity of Short Reinforced Concrete Circular Columns [Volume 35, 7A, 2017, Page 776-787]
Abbas, T.A.
Modified Polymer Matrix Nano Biocomposite for Bone Repair and Replacement- Radiological Study [Volume 35, 4A, 2017, Page 365-371]
Abbas, T.R.
Aerobic Granular Sludge: an Advanced Technology to Treat Oil Refinery and Dairy Wastewaters [Volume 35, 3A, 2017, Page 216-221]
Abbawi, R.F.
Natural Dimension in Ecological Aesthetic of Riverside Landscape [Volume 35, 1C, 2017, Page 75-94]
Abd, W.F.
Some Properties of No-Fines Concrete Produced by Using Demolished Concrete as Recycled Coarse Aggregate [Volume 35, 7A, 2017, Page 741-748]
Abd Alameer, Hayder
Preparation of Emulsified Fuel from used lubricating oil [Volume 35, 1C, 2017, Page 261-267]
Abd alsalam, A.H.
Study of Characterization of Cupper Ferrites Thin Film Prepared by Pulse Laser [Volume 35, 1B, 2017, Page 57-62]
Abdalsalam, A.H.
Preparation and Characterization of PMMA-HDPE and HDPE-PMMA Binary Polymer Blends [Volume 35, 4A, 2017, Page 311-317]
Abdel-Rahim, R.H.
Effect of SiC Particulate on Glass Fibers Reinforced Polymer Composites in Erosive Wear Environment [Volume 35, 2A, 2017, Page 118-123]
Abdl Ghafoor, M.S.
Controlling for Boiler in Thermal Power Plants by Using Fuzzy Logic Controller [Volume 35, 7A, 2017, Page 717-724]
Abdu, M.S.
Prediction of Fatigue Life of Fiber Glass Reinforced Composite (FGRC) using Artificial Neural Network [Volume 35, 4A, 2017, Page 327-339]
AbdulAhadd, E.S.
The Role of New Technology in Inquiry Media Architecture [Volume 35, 1C, 2017, Page 48-63]
Abdu_Lateef, M.S.
Prediction of Fatigue Life of Fiber Glass Reinforced Composite (FGRC) using Artificial Neural Network [Volume 35, 4A, 2017, Page 327-339]
Abdul hameed, M.A.
Study the Effect of adding Natural Rubber and Polymethyl Methacrylate to the Epoxy Resin on the Quantitative Analysis and its Mechanical Properties [Volume 35, 2A, 2017, Page 163-171]
Abdulhameed, N.R.
Enhancement of Silicon Solar Cell’s Performance using Plasmonic Ag Nps [Volume 35, 1B, 2017, Page 19-24]
Abdul Hussein, A.M.
Preparation and Characterization Study of Porous Silicon Doped with Cu and Ag [Volume 35, 1B, 2017, Page 8-12]
Abdul-Hussein, A.B.
Mechanical and Physical Properties of Nano Carbon Tube with Carbon Fiber Reinforced with Polyester Resin [Volume 35, 5A, 2017, Page 465-472]
Abdul kader, N.J.
The Effect of Nanoparticles Additives on Impact Strength of Metal Matrix Composites [Volume 35, 1B, 2017, Page 37-40]
Abdul-kareem, A.F.
Experimental and Theoretical Fatigue Crack Propagation in Vitro of the Bovine and Human cortical Bone in Linear Elastic and Elastic-Plastic Fracture Mechanics [Volume 35, 7A, 2017, Page 685-693]
Ab-dullah, N.A.
Behavior of Piled Raft Foundation Model Embedded within a Gypseous Soil Before and after Soaking [Volume 35, 5A, 2017, Page 445-455]
Abdullah, H.A.
Corrosion Inhibition of Steel (St 44-2) by Pomegranate Shells in Acidic Medium [Volume 35, 4A, 2017, Page 399-405]
Abdullah, H.A.
Anodic Inhibitor Doped Polypyrrole Coating to Reduce Corrosion in Petroleum Medium [Volume 35, 9A, 2017, Page 878-886]
Abdullah, H.N.
Low Energy Consumption for Cooperative and Non-cooperative Cognitive Radio [Volume 35, 3A, 2017, Page 222-228]
Abdullah, M.N.
Multibiometric Identification System based on SVD and Wavelet Decomposition [Volume 35, 1A, 2017, Page 61-67]
Abdullah, R.R.
Effect of Silica Powder Addition on Mechanical Properties of Polymer Laminate Composite [Volume 35, 7A, 2017, Page 737-740]
Abdullah, S.J.
Effect of Particle Size Distribution of Cohesionless Soil and Pile Diameter on the Behavior of Open Ended Pipe Piles [Volume 35, 1A, 2017, Page 83-90]
Abdullah Mansor, Ahmed
Selection of Best House Construction Materials for Roofs and Walls Regarding Cost, Weight, thermal Insulation and Mechanical Properties [Volume 35, 1C, 2017, Page 248-260]
Abdul Latif, N.E.
Recovery of Cobalt and Lithium from Spent Lithium Ion Batteries [Volume 35, 2A, 2017, Page 139-148]
Abdul Latiff, N.E.
Effect of Sintering Process and Starch Amount on the Porosity and Permeability of Al2O3-ZrO2 High Porous Oil Filters [Volume 35, 9A, 2017, Page 887-893]
Abdulmunem, A.R.
An Experimental Investigation on the Performance Enhancement of Photovoltaic/Thermal Panel Using a Tracking System and Nanofluid (Al 2O3) [Volume 35, 5A, 2017, Page 493-508]
Abdulqader, S.S.
Behavior of Tapered Self-Compacting Reinforced Concrete Beams Strengthened by CFRP [Volume 35, 3A, 2017, Page 197-203]
Abdulqadir, I.F.
Economic Feasibility Study of Modern and Conventional Central Heating Systems for Villa Located in Duhok City, Iraq [Volume 35, 7A, 2017, Page 725-736]
Abdul-Rahman, I.
ARDUINO Microcontroller Based Building Security System [Volume 35, 5A, 2017, Page 532-536]
AbdulRahman, N.O.
Improved Sliding Mode Controller for a Nonlinear System Based on a Particle Swarm Optimization Technique [Volume 35, 2A, 2017, Page 155-162]
Abdulrazaq, M.M.
Optimization of MRR and Surface Roughness for 7024 AL-alloy in EDM Process [Volume 35, 5A, 2017, Page 546-553]
Abdulrazaq, N.S.
Prediction of Fatigue Life of Fiber Glass Reinforced Composite (FGRC) using Artificial Neural Network [Volume 35, 4A, 2017, Page 327-339]
Abed, A. L.
Synthesis and Study of Modified Nanostructure Porous Silicon Layers for Chemical Gas Sensing [Volume 35, 10A, 2017, Page 970-974]
Abed, A.H.
Study the Effect of Multilayer Single Point Incremental Forming on Tool Path Mark for AA1050 bottom plates [Volume 35, 6A, 2017, Page 648-652]
Abed, A.L.
Design of Nano-Inhibitor of Dichlorobenzene and It's Adduct and Study of Its Structural and Electronic Properties: DFT Calculations [Volume 35, 8A, 2017, Page 795-800]
Abed, H.S.
Low Energy Consumption for Cooperative and Non-cooperative Cognitive Radio [Volume 35, 3A, 2017, Page 222-228]
Abedalrazzaq, M.H.
Crack Propagation in Cement Mortar Exposed to External Sulfate Attack [Volume 35, 4A, 2017, Page 411-420]
Abid, A.L.
Corrosion Resistance Enhancement in Acidic solution for Austenitic Stainless Steel by Gas-Phase Hybrid Deposition Process [Volume 35, 8A, 2017, Page 788-794]
A. Eedan, O.
Effect of Polypropylene Fibers on Thermal and Some Mechanical Properties of No-fines Concrete [Volume 35, 1A, 2017, Page 76-82]
A. Emad, S.
Welding procedures of Turbine Blades by Using ER 309L Austenitic Filler Wire [Volume 35, 1A, 2017, Page 68-75]
Aghdeab, S.H.
Analysis of the Influence of Different EDM Parameters Using Taguchi Technique [Volume 35, 6A, 2017, Page 571-577]
A. Hammoodi, M.
Study The Effect of Fruit Juice Extract Helianthus Tuberosus on Liver Function and as Antibacterial Agent [Volume 35, 1C, 2017, Page 214-226]
A. Hasan, I
Enhancing Photoelectric Conversion Efficiency of Photovoltaic Panel Using Cooled Water by Evaporation [Volume 35, 5A, 2017, Page 525-531]
Ahmed, A.M.
Recovery of Cobalt and Lithium from Spent Lithium Ion Batteries [Volume 35, 2A, 2017, Page 139-148]
Ahmed, A.M.
Experimental Study of the Performance Water Distillation Device by Using Solar Energy [Volume 35, 6A, 2017, Page 653-659]
Ahmed, B.
Corrosion Behavior of Anodized Pure Zinc in Sea Water [Volume 35, 9A, 2017, Page 961-969]
Ahmed, F. M.
Preparation of a Reinforced Polymeric Coating with Inorganic Nano Additives as UV-Stabilizers and Protect Oil Pipelines from Corrosion [Volume 35, 10A, 2017, Page 1003-1010]
Ahmed, G.A.
Neural Network Model predictive control for diary Falling Film Evaporators [Volume 35, 1A, 2017, Page 91-96]
Ahmed, H S.
Design of Fractal- Based Bandstop Filter for Microwave Radiation Leakage Reduction [Volume 35, 1A, 2017, Page 16-23]
Ahmed, H.K.
Mechanical Properties of Fiberous High Performance Lightweight Aggregate Concrete [Volume 35, 3A, 2017, Page 229-238]
Ahmed, M.M.
Design, manufacture and test of seismic shear (transverse) wave’s source for engineering purposes [Volume 35, 1C, 2017, Page 140-148]
Ahmed, O.A.
High Voltage Gain Impedance-Source Indirect Matrix Converter [Volume 35, 5A, 2017, Page 485-492]
Ahmed, S.A.
Neural Network Model predictive control for diary Falling Film Evaporators [Volume 35, 1A, 2017, Page 91-96]
Ahmed, S.A.
Comprehensive collection for Arabic characters and numbers written by hand [Volume 35, 2B, 2017, Page 204-210]
A. Hussain, R.
Evaluation of the Corrosion Rate of Different Types of Marine Ship Steel using Potentiostatic Test Method in Arabian Gulf Sea Water [Volume 35, 7A, 2017, Page 709-716]
A.Hussein, M.S.
Certain Classes of Univalent Functions Associated With Deferential Operator [Volume 35, 2B, 2017, Page 173-177]
AI.allaq, A A.
Numerical Study of the Effects of Aneurysm and Stenosis in the Left Coronary Artery on the Human Blood Stream [Volume 35, 1A, 2017, Page 29-40]
A. Ibrahim, A.
C-reactive protein as a marker for cancer and poising thyroid gland [Volume 35, 2B, 2017, Page 211-214]
Ajeel, S.A.
Effect of Sintering Process and Starch Amount on the Porosity and Permeability of Al2O3-ZrO2 High Porous Oil Filters [Volume 35, 9A, 2017, Page 887-893]
Ajeel, S.A.
Green Corrosion Inhibitor for Protection of Mild Steel [Volume 35, 9A, 2017, Page 914-921]
Ajlan, A.H.
Design Study of Leak Detection System and the Protection of Crude Oil Pipelines [Volume 35, 9A, 2017, Page 899-902]
A. Kathum, J.
Spectroscopic Characteristics For Rhodamine C Tincture in Diverse Solvents [Volume 35, 2B, 2017, Page 161-165]
Al –Akkam, A. J.
Fractal Rhythm in Architecture Study in Baghdad Traditional Houses [Volume 35, 1C, 2017, Page 95-113]
AL-Algawi, S.
Gas Sensitivity of ITO Composite Prepared by Sol-Gel Method [Volume 35, 10A, 2017, Page 981-986]
Al-Amara, R.R.F.
Interaction between learners within Self-Organized Learning Environments-Spaces of Architectural Engineering Department Case study [Volume 35, 1C, 2017, Page 114-132]
Al-Anbari, R H.
Solar Photocatalytic of Reactive Blue Dye in Aqueous Suspension of V2O5 [Volume 35, 1A, 2017, Page 1-8]
Al-Araji, A.S.
A Cognitive Nonlinear Fractional Order PID Neural Controller Design for Wheeled Mobile Robot based on Bacterial Foraging Optimization Algorithm [Volume 35, 3A, 2017, Page 289-300]
Al-Araji, A.S.
A Cognitive Nonlinear Trajectory Tracking Controller Design for Wheeled Mobile Robot based on Hybrid Bees-PSO Algorithm [Volume 35, 6A, 2017, Page 609-616]
Al-Attar, A.A.
Effect of Sintering Process and Starch Amount on the Porosity and Permeability of Al2O3-ZrO2 High Porous Oil Filters [Volume 35, 9A, 2017, Page 887-893]
Al-Attar, A.A.
Enhance Corrosion Resistance of T22 Alloy by Adding of La3O2 Nanoparticles; Condition of Oil Flow [Volume 35, 9A, 2017, Page 936-942]
Al-Attar, T.S.
Effect of Wetting and Drying Cycles on Behavior of Concrete Externally Strengthened with CFRP Laminates [Volume 35, 7A, 2017, Page 675-684]
AL-Azawi, K.F.
Preparation, Full Characterization and Theoretical Studies for New Herniarin derivatives [Volume 35, 1B, 2017, Page 29-32]
Al-Baghdadi, M.A.
CFD investigation of the erosion severity in 3D flow elbow during crude Oil contaminated sand transportation [Volume 35, 9A, 2017, Page 930-935]
Albarazanjy, M.G.
Treatment of Wastewater from Oil Refinery by Adsorption on Fluidized Bed of Stem Date [Volume 35, 2A, 2017, Page 134-138]
AlBawi, S. Q.
A Survey Using Kano Model and Road map to issues Standard Model of e-commerce Using SPLE technique [Volume 35, 2B, 2017, Page 132-143]
Al-Bayati, N.A.M.
Effect of Shear Span-Depth Ratio on Shear Strength of Porcelanite Lightweight Aggregate Reinforced Concrete Deep Beams Strengthened by Externally Bonded CFRP Strips [Volume 35, 3A, 2017, Page 267-275]
Al-Bayati, S.M.
Synthesis, Structural and Spectroscopic Study of Complexes of Tetradentate Schiff Base Derived from MalonylDihydrazide with Cr(III), Mn(II), Co(II), Cu(II) and Zn(II) Ions [Volume 35, 1B, 2017, Page 50-56]
Aldabbagh, B.M.
Polyamide Nanofibers Coating by Electrospinning Technique for Anti Corrosion Behavior [Volume 35, 10A, 2017, Page 987-991]
Aleabi, S.H.
Study of the Diffusion Coefficient and Hardness for a Composite Material when Immersed in Different Solutions Polymer [Volume 35, 1C, 2017, Page 191-196]
Alfayydh, E.M.
Digital Flow Rate Measurement System Design for Minichannel based on Cross Correlation Technique [Volume 35, 7A, 2017, Page 756-763]
Al.gabban, A.M.
Preparation and Characterization of PMMA-HDPE and HDPE-PMMA Binary Polymer Blends [Volume 35, 4A, 2017, Page 311-317]
Al-Ghaban, A.
Investigation of Solid State Reaction in the Ternary Ti-Al-C, Cr-Al-C and V-Al-C Systems [Volume 35, 7A, 2017, Page 764-771]
AL-Hameedawi, A.
Updating Cadastral Maps using GIS Techniques [Volume 35, 3A, 2017, Page 246-253]
Al-Hashimi, M.A.I.
Aerobic Granular Sludge: an Advanced Technology to Treat Oil Refinery and Dairy Wastewaters [Volume 35, 3A, 2017, Page 216-221]
Al-Hassani, E.S.
Investigation of Corrosion Behavior for Copper-Based Shape Memory Alloys in different Media [Volume 35, 6A, 2017, Page 578-586]
AlHassani, H.M.
Experimental Research on Tension Lap Splice in Reactive Powder Concrete Beams Exposed to Repeated Loading [Volume 35, 5A, 2017, Page 479-484]
Alhayani, N.M.
Use of IT Photographic and GIS in the Analysis of Complex Intersection of University of Baghdad [Volume 35, 1C, 2017, Page 64-74]
Alhtheal, E.D.
Synthesis Nano Zinc Oxide Materials and Their Activity on Fungus Growth [Volume 35, 1B, 2017, Page 76-84]
Ali, A.H.
Investigation of Corrosion Behavior for Copper-Based Shape Memory Alloys in different Media [Volume 35, 6A, 2017, Page 578-586]
Ali, A.K.
Enhancement of Silicon Solar Cell’s Performance using Plasmonic Ag Nps [Volume 35, 1B, 2017, Page 19-24]
Ali, H.A.
Robust Controller Analysis and Design of Medical Haptic Control System [Volume 35, 4A, 2017, Page 318-326]
Ali, I.I.
Optimal Location of SSSC Based on PSO to Improve Voltage Profile and Reduce Iraqi Grid System Losses [Volume 35, 4A, 2017, Page 372-380]
Ali, J K.
Design of Fractal- Based Bandstop Filter for Microwave Radiation Leakage Reduction [Volume 35, 1A, 2017, Page 16-23]
Ali, S.A.
Effect of Aluminum Oxide Nanoparticles Fuel Additives on the Performance and Emissions of Diesel Engine [Volume 35, 9A, 2017, Page 956-960]
Ali bash, M.A.
Microstructure and Phases Analysis for Advanced Plasma Sprayed Zirconia-Ceria-Yttria Thermal Barrier Coating [Volume 35, 10A, 2017, Page 1025-1033]
Ali Bash, M. A.
Design and Evaluation of Zirconia Based Thermal Barrier Powders for Advanced Engines [Volume 35, 10A, 2017, Page 1011-1024]
Alkadir, I.A.
Effect of B4C/Fly Ash Addition on Wear and Mechanical Properties of Al-Cu-Mg Alloy [Volume 35, 4A, 2017, Page 301-310]
Alkawi, A. J.
Electrical Laser Alarm System for Controlling the Buckling Failure of 304 Stainless Steel under Shot Peening Treatment [Volume 35, 5A, 2017, Page 516-524]
Al-Keshwan, M.A.N.
Investigation of Solid State Reaction in the Ternary Ti-Al-C, Cr-Al-C and V-Al-C Systems [Volume 35, 7A, 2017, Page 764-771]
Allaa, A.J.
Study of the Influence of Incorporation of Gold Nanoparticles on the Modified Porous Silicon Sensor for Petroleum Gas Detection [Volume 35, 8A, 2017, Page 811-815]
AL-Luhybi, A.S.
Studying the Effect of Adding Marble and Porcelain Waste on Mechanical Properties of Concrete Containing Recycled Aggregate [Volume 35, 7A, 2017, Page 668-674]
Almeer, A. Q. Abd
Arabic Texts Classification Based on Keywords Extraction Technique [Volume 35, 2B, 2017, Page 96-104]
Al-Moqaram, A.M.H
Fractal Rhythm in Architecture Study in Baghdad Traditional Houses [Volume 35, 1C, 2017, Page 95-113]
Al-Moqaram, A.M.H.
Barometric Trend in Contemporary Design A Study in Bricks Facades [Volume 35, 1C, 2017, Page 1-17]
Al-Moqaram, A.M.H.
Interaction between learners within Self-Organized Learning Environments-Spaces of Architectural Engineering Department Case study [Volume 35, 1C, 2017, Page 114-132]
Al-Neami, M.A.M.
Comparative Study of Bearing Loads for Open Ended Pipe and H-Piles in Sandy Soil [Volume 35, 6A, 2017, Page 593-601]
Al-Obaidy, A H.
Solar Photocatalytic of Reactive Blue Dye in Aqueous Suspension of V2O5 [Volume 35, 1A, 2017, Page 1-8]
Al-Obiady, A.H.
Radon Level Measurements in Soil and Sediments at Oil Field Area and Its Impact on the Environment [Volume 35, 1B, 2017, Page 1-7]
Al Rbeawi, S.
Hydraulically Fractured Formations: Parameters Controlling Performance and Maximum Number of Fractures [Volume 35, 8A, 2017, Page 801-810]
Al-Rubaiey, N.A.
Nano Ferrites as Corrosion Inhibitors for Carbon Steel in Local Iraqi Bentonite Mud [Volume 35, 8A, 2017, Page 849-855]
Alshammari, H.A.H.
Allegation in Architecture (Modernism Villa Savoy as a Model) [Volume 35, 1C, 2017, Page 18-31]
Alshimary, H.J.
Polyamide Nanofibers Coating by Electrospinning Technique for Anti Corrosion Behavior [Volume 35, 10A, 2017, Page 987-991]
AL-Sulaifanie, B.K.
Digital Modulation Recognition in Noisy Environment Using a Learning Machine [Volume 35, 6A, 2017, Page 624-633]
Al-Suraifi, A.A.
Simulation of Contaminants Transport and Groundwater Flow for Basrah Landfill Site [Volume 35, 6A, 2017, Page 560-570]
Al-Waily, M.
CFD investigation of the erosion severity in 3D flow elbow during crude Oil contaminated sand transportation [Volume 35, 9A, 2017, Page 930-935]
Al-Wakel, S.F.A.
Experimental and Numerical Analysis of Piled Raft Foundation Embedded within Partially Saturated Soil [Volume 35, 2A, 2017, Page 97-105]
Alwan, A.
Radon Level Measurements in Soil and Sediments at Oil Field Area and Its Impact on the Environment [Volume 35, 1B, 2017, Page 1-7]
Alwan, A.M.
Study of the Influence of Incorporation of Gold Nanoparticles on the Modified Porous Silicon Sensor for Petroleum Gas Detection [Volume 35, 8A, 2017, Page 811-815]
Alwasiti, A. A.
Improving Drilling Fluid Properties by Using Nano-Additives [Volume 35, 10A, 2017, Page 1034-1041]
Alwasiti, A.A.
Effect of Surfactant Additives on Phase Inversion in Oil-Water Pipe Flow System [Volume 35, 2A, 2017, Page 106-110]
AL-Zubaidi, N. S.
Improving Drilling Fluid Properties by Using Nano-Additives [Volume 35, 10A, 2017, Page 1034-1041]
AL- Zubaidy, K. A.
On aNew Class of Meromorphically Univalent Functions with Applications to Geometric Functions [Volume 35, 2B, 2017, Page 215-220]
Alzuhairi, M.A.H
Nano ZnO Catalyst for Chemical Recycling of Polyethylene terephthalate (PET) [Volume 35, 8A, 2017, Page 831-837]
Alzuhairi, M.A.H.
Heat Transfer Performance Improvement in the Split Units in Humid Environment through Drain Water Circulation [Volume 35, 2A, 2017, Page 130-133]
Amin, S.A.
Radon Level Measurements in Soil and Sediments at Oil Field Area and Its Impact on the Environment [Volume 35, 1B, 2017, Page 1-7]
Ammar, S.H.
Adsorptive Desulfurization of Gas Oil Over Cu2O/AC, ZnO/AC and NiO/AC Adsorbents [Volume 35, 8A, 2017, Page 856-863]
A. Mohammed, A.
C-reactive protein as a marker for cancer and poising thyroid gland [Volume 35, 2B, 2017, Page 211-214]
A. Mohammed, N.
The Effect of some Weather Factors on the Speed of the Sound Waves Inside the Surface Boundary Layer in Baghdad City [Volume 35, 1C, 2017, Page 207-213]
Anaee, R.A.
Anodic Inhibitor Doped Polypyrrole Coating to Reduce Corrosion in Petroleum Medium [Volume 35, 9A, 2017, Page 878-886]
Anead, H.S.
Controlling for Boiler in Thermal Power Plants by Using Fuzzy Logic Controller [Volume 35, 7A, 2017, Page 717-724]
A. Olaa, H.
Welding procedures of Turbine Blades by Using ER 309L Austenitic Filler Wire [Volume 35, 1A, 2017, Page 68-75]
Asaad, A.
Study Using Different Adsorbents Materials in Purification of Waste Lubricating Oil [Volume 35, 1C, 2017, Page 183-190]
A. Salih, Sh.
Some Properties of No-Fines Concrete Produced by Using Demolished Concrete as Recycled Coarse Aggregate [Volume 35, 7A, 2017, Page 741-748]
Assad, Awali
Preparation of Emulsified Fuel from used lubricating oil [Volume 35, 1C, 2017, Page 261-267]
A. Sukkar, K.
Investigation Nano coating for Corrosion Protection of Petroleum Pipeline Steel Type A106 Grade B; Theoretical and Practical Study in Iraqi Petroleum Sector [Volume 35, 10A, 2017, Page 1042-1051]
Ataiwi, A.H.
Corrosion Protection of Carbon Steel by Zn/PPY mCoating as Layers in 3.5% NaCl [Volume 35, 8A, 2017, Page 821-830]
Ati, A.A.
Nano Ferrites as Corrosion Inhibitors for Carbon Steel in Local Iraqi Bentonite Mud [Volume 35, 8A, 2017, Page 849-855]
Atiyah, A.A.
Investigation of Solid State Reaction in the Ternary Ti-Al-C, Cr-Al-C and V-Al-C Systems [Volume 35, 7A, 2017, Page 764-771]
Attiya, H.G.
Study of the Diffusion Coefficient and Hardness for a Composite Material when Immersed in Different Solutions Polymer [Volume 35, 1C, 2017, Page 191-196]
Atya, Z.F.
Effect of SiC Particulate on Glass Fibers Reinforced Polymer Composites in Erosive Wear Environment [Volume 35, 2A, 2017, Page 118-123]
Awad, S.A.
Improvement, the Performance of Polyurethane (PUR), Y-290 Resin as Coating of Oil Pipeline by Using Multi-Walled Carbon Nanotubes (MWCNTs) [Volume 35, 8A, 2017, Page 845-848]
B
Baqir, H.H.
Behavior of Piled Raft Foundation Model Embedded within a Gypseous Soil Before and after Soaking [Volume 35, 5A, 2017, Page 445-455]
Bash, M. A.Ali
Effect of feed rate on laser surface cladding of cold rolled carbon steel [Volume 35, 9A, 2017, Page 922-929]
Bdaiwi, B.O.
Experimental and Theoretical Fatigue Crack Propagation in Vitro of the Bovine and Human cortical Bone in Linear Elastic and Elastic-Plastic Fracture Mechanics [Volume 35, 7A, 2017, Page 685-693]
Bedan, A.S.
The Effects of Process Parameters on Residual Stresses in Single Point Incremental Forming of A1050 Aluminum Using ANOVA Model [Volume 35, 1A, 2017, Page 41-48]
Bedan, A.S.
Study the Effect of Multilayer Single Point Incremental Forming on Tool Path Mark for AA1050 bottom plates [Volume 35, 6A, 2017, Page 648-652]
Bohan, A.J.
Use of Nano-Magnetic Material for Removal of Heavy Metals from Wastewater [Volume 35, 9A, 2017, Page 903-908]
C
Croock, M.S.
Dental X-Ray Based Human Identification System for Forensic [Volume 35, 1A, 2017, Page 49-60]
D
Dawood, H.A.
Effect of Wetting and Drying Cycles on Behavior of Concrete Externally Strengthened with CFRP Laminates [Volume 35, 7A, 2017, Page 675-684]
Dhahad, H.A.
Digital Flow Rate Measurement System Design for Minichannel based on Cross Correlation Technique [Volume 35, 7A, 2017, Page 756-763]
Dhahad, H.A.
Effect of Aluminum Oxide Nanoparticles Fuel Additives on the Performance and Emissions of Diesel Engine [Volume 35, 9A, 2017, Page 956-960]
Dheyab, A.B.
Study of the Influence of Incorporation of Gold Nanoparticles on the Modified Porous Silicon Sensor for Petroleum Gas Detection [Volume 35, 8A, 2017, Page 811-815]
Dh. Khudhur, S.
Dental X-Ray Based Human Identification System for Forensic [Volume 35, 1A, 2017, Page 49-60]
D. Kamel, M.
C-reactive protein as a marker for cancer and poising thyroid gland [Volume 35, 2B, 2017, Page 211-214]
E
Esmael, I. A.
Preparation Nano Composite Material Used in Oil and Gas Pipelines [Volume 35, 9A, 2017, Page 950-955]
Esmael, I. A.
Preparation of a Reinforced Polymeric Coating with Inorganic Nano Additives as UV-Stabilizers and Protect Oil Pipelines from Corrosion [Volume 35, 10A, 2017, Page 1003-1010]
F
Fadhil, A.H.
Welding procedures of Turbine Blades by Using ER 309L Austenitic Filler Wire [Volume 35, 1A, 2017, Page 68-75]
Fahem, K.H.
Digital Flow Rate Measurement System Design for Minichannel based on Cross Correlation Technique [Volume 35, 7A, 2017, Page 756-763]
Falih, A.S.
Manufacturing of Bi-functional Nano-sensor of Nobel Metal for Hydrocarbon Gas Detection in Petroleum Sector Using Pulse Laser Deposition Technique [Volume 35, 8A, 2017, Page 864-871]
Farge, T.Z.
The Effect of Speed Smart Control System SSCS on the Performance of Hydropower System [Volume 35, 6A, 2017, Page 602-608]
Farhan, N.M.
Effect of Surfactant Additives on Phase Inversion in Oil-Water Pipe Flow System [Volume 35, 2A, 2017, Page 106-110]
Faris, M.R.
Seepage Analysis through an Earth Dam (KHASA-CHAI Dam) as a Case Study [Volume 35, 2A, 2017, Page 172-181]
Fayadh, R.A.
A Small Design of Ultra-Wideband Printed Antenna with Notched and Raked Planar Patch [Volume 35, 5A, 2017, Page 456-464]
F.Hasan, Sh.
Prediction the Initiation of Pitting Corrosion Depending on Carbides in the Microstructure of 304 Stainless Steel [Volume 35, 10A, 2017, Page 975-980]
F. Nasser, E.
Improvement of Corner Detection Algorithms (Harris, FAST and SUSAN) Based on Reduction of Features Space and Complexity Time [Volume 35, 2B, 2017, Page 112-118]
Frayyeh, Q.J.
Performance of Self-Compacting Concrete Containing Pozzolanic Materials in Aggressive Environment [Volume 35, 5A, 2017, Page 439-444]
F.Sultan, K.
Experimental Study of the Performance Water Distillation Device by Using Solar Energy [Volume 35, 6A, 2017, Page 653-659]
G
Ghanim, N. M.
Nested Method for Optimizing Elliptic Curve Scalar Multiplication [Volume 35, 2B, 2017, Page 105-111]
Gharkan, M.R.
Improvement the Mechanical and Physical Properties of Epoxy–Polyurethane Matrix Resin by Using Kevlar Fiber and ZnO Particles [Volume 35, 3A, 2017, Page 261-266]
Ghazi, S.K.
Optimization of MRR and Surface Roughness for 7024 AL-alloy in EDM Process [Volume 35, 5A, 2017, Page 546-553]
G. Mutar, A.
The Effect of some Weather Factors on the Speed of the Sound Waves Inside the Surface Boundary Layer in Baghdad City [Volume 35, 1C, 2017, Page 207-213]
Gorgis, I.N.
Some Properties of No-Fines Concrete Produced by Using Demolished Concrete as Recycled Coarse Aggregate [Volume 35, 7A, 2017, Page 741-748]
H
Hadi, E.M.
Manufacturing of Refractory Bricks from Iraqi Flint [Volume 35, 1C, 2017, Page 161-171]
Hadi, E.M.
Manufacturing of Thermal and Acoustic Insulating from (White Cement and Hemp Short Fibers) by using Recycled Paper [Volume 35, 1C, 2017, Page 172-182]
Hadi, I.Z.
Controlling of Time-Overrun in Construction Projects in Iraq [Volume 35, 2A, 2017, Page 111-117]
Hadi, N.M.
Fabrication of High Purity Copper Nanopowder via Wires Explosion Technique [Volume 35, 8A, 2017, Page 816-820]
Hadi, R.S.
Nano ZnO Catalyst for Chemical Recycling of Polyethylene terephthalate (PET) [Volume 35, 8A, 2017, Page 831-837]
Hafiz, M. H.
Design and Evaluation of Zirconia Based Thermal Barrier Powders for Advanced Engines [Volume 35, 10A, 2017, Page 1011-1024]
Hafiz, M.H.
Microstructure and Phases Analysis for Advanced Plasma Sprayed Zirconia-Ceria-Yttria Thermal Barrier Coating [Volume 35, 10A, 2017, Page 1025-1033]
Haji, S.H.
Digital Modulation Recognition in Noisy Environment Using a Learning Machine [Volume 35, 6A, 2017, Page 624-633]
Haleem, A.M.
Copper Oxide NPs: Synthesis and their Anti-Dermatophyte Activity against Trichophyton rubrum [Volume 35, 3A, 2017, Page 276-281]
Hamad, Q.A.
Study the Effect of Nano Ceramic Particles on Some Physical Properties of Acrylic Resins [Volume 35, 2A, 2017, Page 124-129]
Hamadi, A.S.
Effect of Aluminum Oxide Nanoparticles Fuel Additives on the Performance and Emissions of Diesel Engine [Volume 35, 9A, 2017, Page 956-960]
Hamadi, M.M.
Variation of Heat Transfer Coefficient for Inside and Outside Closed Space with Respect to Temperature Gradient for Three Different Metals [Volume 35, 5A, 2017, Page 537-545]
H. Amanah, B.
Effect of Polypropylene Fibers on Thermal and Some Mechanical Properties of No-fines Concrete [Volume 35, 1A, 2017, Page 76-82]
Hamdan, W.K.
Experimental Analysis of Several Variables Influencing Formed Thickness in Two-Point Incremental Forming Process [Volume 35, 7A, 2017, Page 749-755]
Hameed, S.A.
Enhancing of Crushed Brick Aggregate Concrete by Adding Alkalis [Volume 35, 6A, 2017, Page 554-559]
Hameed, T.M.
Study Using Different Adsorbents Materials in Purification of Waste Lubricating Oil [Volume 35, 1C, 2017, Page 183-190]
Hammood, D.A.
Design and Simulation of Microstrip Bandpass Filter with Regular Slots [Volume 35, 1A, 2017, Page 24-28]
Hamoudi, A.K.
Improved Sliding Mode Controller for a Nonlinear System Based on a Particle Swarm Optimization Technique [Volume 35, 2A, 2017, Page 155-162]
Hamza, M.S.
Effect of Silica Powder Addition on Mechanical Properties of Polymer Laminate Composite [Volume 35, 7A, 2017, Page 737-740]
Hamza, M.S.
Production Micro and Nano magnesium powder by Pulsed Laser Ablation [Volume 35, 7A, 2017, Page 772-775]
Hani, A.A.
Experimental and Numerical Analysis of Piled Raft Foundation Embedded within Partially Saturated Soil [Volume 35, 2A, 2017, Page 97-105]
Hanoos, M.M.
The Effect of Nanoparticles Additives on Impact Strength of Metal Matrix Composites [Volume 35, 1B, 2017, Page 37-40]
Hasan, A. S.
Synthesis and Study of Modified Nanostructure Porous Silicon Layers for Chemical Gas Sensing [Volume 35, 10A, 2017, Page 970-974]
Hasan, A.S.
Corrosion Resistance Enhancement in Acidic solution for Austenitic Stainless Steel by Gas-Phase Hybrid Deposition Process [Volume 35, 8A, 2017, Page 788-794]
Hasan, A.S.
Design of Nano-Inhibitor of Dichlorobenzene and It's Adduct and Study of Its Structural and Electronic Properties: DFT Calculations [Volume 35, 8A, 2017, Page 795-800]
Hasan, H.M.
Implementation of Mobile Robot’s Navigation using SLAM based on Cloud Computing [Volume 35, 6A, 2017, Page 634-639]
Hasan Hashim Al-Majidi, Basim
Immunity in Architecture (Analytical study of the design of the environment surrounding the university buildings as an entry point to achieve the security and safety) [Volume 35, 1C, 2017, Page 32-47]
Hasen, S.S.
Numerical Solution for A Special Class of optimal Control Problem by using Hermite polynomial [Volume 35, 1B, 2017, Page 41-45]
Hashim, F.A.
Effect of Silica Powder Addition on Mechanical Properties of Polymer Laminate Composite [Volume 35, 7A, 2017, Page 737-740]
Hassan, Q.A-M.
Experimental Research on Tension Lap Splice in Reactive Powder Concrete Beams Exposed to Repeated Loading [Volume 35, 5A, 2017, Page 479-484]
Hassan, R.F.
Information Hiding Using Geographic Information System (GIS) Vector File [Volume 35, 2B, 2017, Page 182-188]
Hassan, Z.K.
Studying of Mechanical Properties for AlSiC Composites [Volume 35, 2B, 2017, Page 91-95]
Hassoon, K.I.
Enhancement of Silicon Solar Cell’s Performance using Plasmonic Ag Nps [Volume 35, 1B, 2017, Page 19-24]
Hatem, H.R.
ARDUINO Microcontroller Based Building Security System [Volume 35, 5A, 2017, Page 532-536]
Hatem, S.T.
Investigation of Corrosion Behavior for Copper-Based Shape Memory Alloys in different Media [Volume 35, 6A, 2017, Page 578-586]
H. Hashem, S.
An Effective Preprocessing Step Algorithm in Text Mining Application [Volume 35, 2B, 2017, Page 126-131]
H. Jasim, H.
Effect Nano-SiC Additives on Physical and Mechanical Properties of Bauxite Refractories Used in Oil Treatment Units [Volume 35, 10A, 2017, Page 992-998]
H. Jassim, H.
Evaluation of the Corrosion Rate of Different Types of Marine Ship Steel using Potentiostatic Test Method in Arabian Gulf Sea Water [Volume 35, 7A, 2017, Page 709-716]
H. Jwaid, K.
A study of kidney Parameters Induced by Porous Silicon Nanoparticles [Volume 35, 2B, 2017, Page 150-153]
H. Khazaal, Sh.
Levels of some trace elements and other metals in many brands of cosmetic products in Iraq markets [Volume 35, 2B, 2017, Page 221-224]
H. Maray, A.
Mobile Base Program for Drug-Drug Interactions (MBPDDIs) [Volume 35, 1B, 2017, Page 63-67]
H. Obaeed, N.
Investigation Nano coating for Corrosion Protection of Petroleum Pipeline Steel Type A106 Grade B; Theoretical and Practical Study in Iraqi Petroleum Sector [Volume 35, 10A, 2017, Page 1042-1051]
Huseen, J.
Study Using Different Adsorbents Materials in Purification of Waste Lubricating Oil [Volume 35, 1C, 2017, Page 183-190]
Hussain, A. I.
Electrical Laser Alarm System for Controlling the Buckling Failure of 304 Stainless Steel under Shot Peening Treatment [Volume 35, 5A, 2017, Page 516-524]
Hussein, H.A.
Modeling and Simulation of an Absorption Solar Cooling System Under Iraqi Weather Conditions [Volume 35, 4A, 2017, Page 356-364]
Hussein, H.A.
An Experimental Investigation on the Performance Enhancement of Photovoltaic/Thermal Panel Using a Tracking System and Nanofluid (Al 2O3) [Volume 35, 5A, 2017, Page 493-508]
Hussein, R.A.
Multibiometric Identification System based on SVD and Wavelet Decomposition [Volume 35, 1A, 2017, Page 61-67]
Hussein, R.M.
Effect of Friction on the Dynamical Analysis of Three-Link Planar Robot Arm by Using Lagrange Approach [Volume 35, 6A, 2017, Page 587-592]
Hussen, S.M.
Studying of Mechanical Properties for AlSiC Composites [Volume 35, 2B, 2017, Page 91-95]
I
I.Alrubaiey, S.
Prediction the Initiation of Pitting Corrosion Depending on Carbides in the Microstructure of 304 Stainless Steel [Volume 35, 10A, 2017, Page 975-980]
Ibraheem, N. F.
Preparation Nano Composite Material Used in Oil and Gas Pipelines [Volume 35, 9A, 2017, Page 950-955]
Ibraheem, N. F.
Preparation of a Reinforced Polymeric Coating with Inorganic Nano Additives as UV-Stabilizers and Protect Oil Pipelines from Corrosion [Volume 35, 10A, 2017, Page 1003-1010]
Ibrahim, A.F.
Influence of EDM Parameters on the Appearance of Recast Layer [Volume 35, 7A, 2017, Page 694-700]
Ibrahim, A.K.
Experimental Analysis of Several Variables Influencing Formed Thickness in Two-Point Incremental Forming Process [Volume 35, 7A, 2017, Page 749-755]
Ibrahim, S.K.
Behavior of Tapered Self-Compacting Reinforced Concrete Beams Strengthened by CFRP [Volume 35, 3A, 2017, Page 197-203]
Ibrahim, S.Q.
Mechanical Properties of Unsaturated Polyester Filled With Silica Fume, Glass Powder and Carbon Black [Volume 35, 6A, 2017, Page 640-647]
Ibrahim Kaduri, Jaleel
Selection of Best House Construction Materials for Roofs and Walls Regarding Cost, Weight, thermal Insulation and Mechanical Properties [Volume 35, 1C, 2017, Page 248-260]
I. Ibrahim, S.
Spectroscopic Characteristics For Rhodamine C Tincture in Diverse Solvents [Volume 35, 2B, 2017, Page 161-165]
J
Jaafar, A.M.
The Role of New Technology in Inquiry Media Architecture [Volume 35, 1C, 2017, Page 48-63]
J. abd Al-Hussien, H.
Manufacturing Porous Ceramic from Iraqi Kaolin by using paper pulp [Volume 35, 1C, 2017, Page 227-236]
J. Abd Al-Hussien, H.
Effect Buried Soil On Mechanical and Physical Properties of (UP) Composites Flexture strength [Volume 35, 1C, 2017, Page 237-247]
Jaber, H.A.
Study the Effect of Glass and Carbon Fibers on the Firebrick Properties [Volume 35, 4A, 2017, Page 391-398]
Jabir, M.S.
Detection of active compounds in the crude aqueous extract of Annona muricata plant peels and used as an anti-oxidant [Volume 35, 1C, 2017, Page 157-160]
Jabur, A.R.
Effects of Ambient Temperature and Needle to Collector Distance on PVA Nanofibers Diameter Obtained From Electrospinning Technique [Volume 35, 4A, 2017, Page 340-347]
Jaed, G.M.
Use of Nano-Magnetic Material for Removal of Heavy Metals from Wastewater [Volume 35, 9A, 2017, Page 903-908]
Jafar, A.T.
Study Using Different Adsorbents Materials in Purification of Waste Lubricating Oil [Volume 35, 1C, 2017, Page 183-190]
Jafar, S.A.
The Influence of Area Ratio, Temperature and Rotational Speed on Galvanic corrosion between Law Alloy Steel–Copper couple in 4%NaCl Solution [Volume 35, 6A, 2017, Page 617-623]
Jaffar, S.A.
Adsorptive Desulfurization of Gas Oil Over Cu2O/AC, ZnO/AC and NiO/AC Adsorbents [Volume 35, 8A, 2017, Page 856-863]
Jajjawi, N.H.
Dynamic Finite Element Analysis of Sandy Soil-Pipe System Reinforced by Geogrid [Volume 35, 4A, 2017, Page 421-430]
Jalil, J.M.
Numerical and Experimental Investigation of Solar Air Collectors Performance Connected in Series [Volume 35, 3A, 2017, Page 190-196]
Jammal, N.
Influence of EDM Parameters on the Appearance of Recast Layer [Volume 35, 7A, 2017, Page 694-700]
Jasim, O.Z.
Use of IT Photographic and GIS in the Analysis of Complex Intersection of University of Baghdad [Volume 35, 1C, 2017, Page 64-74]
Jassam, R.H.
Synthesis of Dopant Zno Thin Films with Al Using Dip Coating for Gas Sensors [Volume 35, 8A, 2017, Page 842-844]
J. Bohan, A.
Synthesis Nano Zinc Oxide Materials and Their Activity on Fungus Growth [Volume 35, 1B, 2017, Page 76-84]
Jeiad, H.A.
Multibiometric Identification System based on SVD and Wavelet Decomposition [Volume 35, 1A, 2017, Page 61-67]
J. Haider, A.
Titanium-Base Nanostructure Coatings for AISI M52 Tool Steel by Gas-Phase Mix Process [Volume 35, 3A, 2017, Page 182-189]
J . Halbos, R.
Gas Sensitivity of ITO Composite Prepared by Sol-Gel Method [Volume 35, 10A, 2017, Page 981-986]
J. Kadhim, M.
Investigation Nano coating for Corrosion Protection of Petroleum Pipeline Steel Type A106 Grade B; Theoretical and Practical Study in Iraqi Petroleum Sector [Volume 35, 10A, 2017, Page 1042-1051]
J. Kata, A.
Preparation and Characterization Study of Porous Silicon Doped with Cu and Ag [Volume 35, 1B, 2017, Page 8-12]
J.M. Al-Alkawi, H.
Mechanical Properties of 7075 Aluminum Alloy Matrix/Al2O3 Particles Reinforced Composites [Volume 35, 3A, 2017, Page 239-245]
J. Shareef, S.
On Generalized Permuting Left 3-Derivations of Prime Rings [Volume 35, 1B, 2017, Page 25-28]
Jumaha, G.F.
Aerobic Granular Sludge: an Advanced Technology to Treat Oil Refinery and Dairy Wastewaters [Volume 35, 3A, 2017, Page 216-221]
K
Kadem, A.J.
Enhancing Photoelectric Conversion Efficiency of Photovoltaic Panel Using Cooled Water by Evaporation [Volume 35, 5A, 2017, Page 525-531]
Kadhim, A.
Copper Oxide NPs: Synthesis and their Anti-Dermatophyte Activity against Trichophyton rubrum [Volume 35, 3A, 2017, Page 276-281]
Kadhim, F.S.
Hydraulically Fractured Formations: Parameters Controlling Performance and Maximum Number of Fractures [Volume 35, 8A, 2017, Page 801-810]
Kadhim, F.S.
Nano Ferrites as Corrosion Inhibitors for Carbon Steel in Local Iraqi Bentonite Mud [Volume 35, 8A, 2017, Page 849-855]
Kadhim, M. J.
Design and Evaluation of Zirconia Based Thermal Barrier Powders for Advanced Engines [Volume 35, 10A, 2017, Page 1011-1024]
Kadhim, M.J.
Study the Effects of Nano-Materials Addition on Some Mechanical Properties of Cement Mortar [Volume 35, 4A, 2017, Page 348-355]
Kadhim, M.J.
Microstructure and Phases Analysis for Advanced Plasma Sprayed Zirconia-Ceria-Yttria Thermal Barrier Coating [Volume 35, 10A, 2017, Page 1025-1033]
Kadhim, S.M.
Manufacturing of Bi-functional Nano-sensor of Nobel Metal for Hydrocarbon Gas Detection in Petroleum Sector Using Pulse Laser Deposition Technique [Volume 35, 8A, 2017, Page 864-871]
Kadhum, N.H.
Neural Network Model predictive control for diary Falling Film Evaporators [Volume 35, 1A, 2017, Page 91-96]
Kamal, M.
The Effects of Process Parameters on Residual Stresses in Single Point Incremental Forming of A1050 Aluminum Using ANOVA Model [Volume 35, 1A, 2017, Page 41-48]
Karam, M.
Natural Dimension in Ecological Aesthetic of Riverside Landscape [Volume 35, 1C, 2017, Page 75-94]
Karim, A.A.
Improvement of Corner Detection Algorithms (Harris, FAST and SUSAN) Based on Reduction of Features Space and Complexity Time [Volume 35, 2B, 2017, Page 112-118]
Kashan, J.S.
Modified Polymer Matrix Nano Biocomposite for Bone Repair and Replacement- Radiological Study [Volume 35, 4A, 2017, Page 365-371]
K. Faraj, A.
On Generalized Permuting Left 3-Derivations of Prime Rings [Volume 35, 1B, 2017, Page 25-28]
K. Fattah, F. A.
Electrical Laser Alarm System for Controlling the Buckling Failure of 304 Stainless Steel under Shot Peening Treatment [Volume 35, 5A, 2017, Page 516-524]
Khalaf, E.M.
Improvement, the Performance of Polyurethane (PUR), Y-290 Resin as Coating of Oil Pipeline by Using Multi-Walled Carbon Nanotubes (MWCNTs) [Volume 35, 8A, 2017, Page 845-848]
Khalaf, M.Sh.
Preparation of Silver Nanoparticles by Chemical Reaction Method at Different Reaction Temperatures and the Study of their Antibacterial Activity [Volume 35, 2B, 2017, Page 189-194]
Khaleefah, Z.A.
Production Micro and Nano magnesium powder by Pulsed Laser Ablation [Volume 35, 7A, 2017, Page 772-775]
Khaleel, T.A.
Controlling of Time-Overrun in Construction Projects in Iraq [Volume 35, 2A, 2017, Page 111-117]
Khaleel, T.A.
Bidding Strategy and Cash Flow Forecasting in Private Construction Companies in Iraq [Volume 35, 3A, 2017, Page 254-260]
Khalil, B.I.
Nano ZnO Catalyst for Chemical Recycling of Polyethylene terephthalate (PET) [Volume 35, 8A, 2017, Page 831-837]
Khalil, W.I.
Mechanical Properties of Fiberous High Performance Lightweight Aggregate Concrete [Volume 35, 3A, 2017, Page 229-238]
Khudhair, M.M.
Study Using Different Adsorbents Materials in Purification of Waste Lubricating Oil [Volume 35, 1C, 2017, Page 183-190]
Khulaef, J.H.
Effect of Deposition Temperature on Optical and Crystallographic Properties of CsI Thick Films Deposited using Spray Pyrolysis [Volume 35, 2B, 2017, Page 195-203]
K. Resan, K.
CFD investigation of the erosion severity in 3D flow elbow during crude Oil contaminated sand transportation [Volume 35, 9A, 2017, Page 930-935]
L
Lafta, M. H.
On aNew Class of Meromorphically Univalent Functions with Applications to Geometric Functions [Volume 35, 2B, 2017, Page 215-220]
L. Jawad, Rasheed
Design and Simulate a New Defense System of Free Electron Laser DSFEL [Volume 35, 2B, 2017, Page 166-172]
L. Mohammed, N.
Mobile Base Program for Drug-Drug Interactions (MBPDDIs) [Volume 35, 1B, 2017, Page 63-67]
M
M. Abdulhadi, M.
E–Voting System based on Secret Sharing Scheme [Volume 35, 1B, 2017, Page 13-18]
M. Abdullah, S.
Hybrid Metaheuristic Technique Based Tabu Search and Simulated Annealing [Volume 35, 2B, 2017, Page 154-160]
Magamiss, M. A.
Nested Method for Optimizing Elliptic Curve Scalar Multiplication [Volume 35, 2B, 2017, Page 105-111]
Mahdi, B.R.
Design Study of Leak Detection System and the Protection of Crude Oil Pipelines [Volume 35, 9A, 2017, Page 899-902]
Mahdi, B.S.
Brazing of Pure Aluminum by Aluminum Silicon Filler Metal Alloys [Volume 35, 2A, 2017, Page 149-154]
Mahdi, G.A.
Corrosion Protection of Carbon Steel by Zn/PPY mCoating as Layers in 3.5% NaCl [Volume 35, 8A, 2017, Page 821-830]
Mahmood, D.
Improving Drilling Fluid Properties by Using Nano-Additives [Volume 35, 10A, 2017, Page 1034-1041]
Mahmood, M.R.
Effect of Particle Size Distribution of Cohesionless Soil and Pile Diameter on the Behavior of Open Ended Pipe Piles [Volume 35, 1A, 2017, Page 83-90]
Mahmood, M.R.
Experimental and Numerical Analysis of Piled Raft Foundation Embedded within Partially Saturated Soil [Volume 35, 2A, 2017, Page 97-105]
Mahmood, M.R.
Behavior of Piled Raft Foundation Model Embedded within a Gypseous Soil Before and after Soaking [Volume 35, 5A, 2017, Page 445-455]
Mahmoud, N S.
Numerical Study of the Effects of Aneurysm and Stenosis in the Left Coronary Artery on the Human Blood Stream [Volume 35, 1A, 2017, Page 29-40]
Majeed, A.H.
Mechanical Properties of Unsaturated Polyester Filled With Silica Fume, Glass Powder and Carbon Black [Volume 35, 6A, 2017, Page 640-647]
M. Al, H. J.
Electrical Laser Alarm System for Controlling the Buckling Failure of 304 Stainless Steel under Shot Peening Treatment [Volume 35, 5A, 2017, Page 516-524]
M. ALI, A.
Synthesis of Magnetic MWCNTs Nanohybrids and Application in Remediation of Chromium Ions in Refinery Wastewater [Volume 35, 8A, 2017, Page 838-841]
M. Al-Khafaji, H.
Gene Expression Bcl-2 Gene in Cancer of Brest in Iraqi population [Volume 35, 2B, 2017, Page 119-125]
Mansour, H.L.
Preparation of Silver Nanoparticles by Chemical Reaction Method at Different Reaction Temperatures and the Study of their Antibacterial Activity [Volume 35, 2B, 2017, Page 189-194]
M. Eltayef, E.
Study The Effect of Fruit Juice Extract Helianthus Tuberosus on Liver Function and as Antibacterial Agent [Volume 35, 1C, 2017, Page 214-226]
M. G. Al-Saidi, N.
E–Voting System based on Secret Sharing Scheme [Volume 35, 1B, 2017, Page 13-18]
M. Hadi, E.
Manufacturing Porous Ceramic from Iraqi Kaolin by using paper pulp [Volume 35, 1C, 2017, Page 227-236]
M. Hadi, Enas
Zircon bonded with Iraqi Kaolin [Volume 35, 1C, 2017, Page 197-206]
M. Hadi, R.
An Effective Preprocessing Step Algorithm in Text Mining Application [Volume 35, 2B, 2017, Page 126-131]
M. Hameed, Taghreed
Preparation of Emulsified Fuel from used lubricating oil [Volume 35, 1C, 2017, Page 261-267]
Midhat, B.F.
Optimal LQR Controller Design for Wing Rock Motion Control in Delta wing Aircraft [Volume 35, 5A, 2017, Page 473-478]
M. Nayef, U.
Preparation and Characterization Study of Porous Silicon Doped with Cu and Ag [Volume 35, 1B, 2017, Page 8-12]
M. Nayef, U.
A study of kidney Parameters Induced by Porous Silicon Nanoparticles [Volume 35, 2B, 2017, Page 150-153]
Mohamed, A.A.
Study of Cytogenetic Effects of Cimetidine Drug in White mice (Mus musculus) [Volume 35, 1C, 2017, Page 149-156]
Mohamed, T.G.
Study of Cytogenetic Effects of Cimetidine Drug in White mice (Mus musculus) [Volume 35, 1C, 2017, Page 149-156]
Mohamed Ibrahim, Amer
Selection of Best House Construction Materials for Roofs and Walls Regarding Cost, Weight, thermal Insulation and Mechanical Properties [Volume 35, 1C, 2017, Page 248-260]
Mohammed, A. I.
Effect of feed rate on laser surface cladding of cold rolled carbon steel [Volume 35, 9A, 2017, Page 922-929]
Mohammed, A.G.
Prediction of Fatigue Life of Fiber Glass Reinforced Composite (FGRC) using Artificial Neural Network [Volume 35, 4A, 2017, Page 327-339]
Mohammed, A.S.
Effect of Shear Span-Depth Ratio on Shear Strength of Porcelanite Lightweight Aggregate Reinforced Concrete Deep Beams Strengthened by Externally Bonded CFRP Strips [Volume 35, 3A, 2017, Page 267-275]
Mohammed, A.Z.
Production Micro and Nano magnesium powder by Pulsed Laser Ablation [Volume 35, 7A, 2017, Page 772-775]
Mohammed, A.Z.
Design Study of Leak Detection System and the Protection of Crude Oil Pipelines [Volume 35, 9A, 2017, Page 899-902]
Mohammed, D.H.
Effect of Wetting and Drying Cycles on Behavior of Concrete Externally Strengthened with CFRP Laminates [Volume 35, 7A, 2017, Page 675-684]
Mohammed, E A.
Solar Photocatalytic of Reactive Blue Dye in Aqueous Suspension of V2O5 [Volume 35, 1A, 2017, Page 1-8]
Mohammed, F. Q.
Synthesis and Study of Modified Nanostructure Porous Silicon Layers for Chemical Gas Sensing [Volume 35, 10A, 2017, Page 970-974]
Mohammed, F.Q.
Titanium-Base Nanostructure Coatings for AISI M52 Tool Steel by Gas-Phase Mix Process [Volume 35, 3A, 2017, Page 182-189]
Mohammed, F.Q.
Corrosion Resistance Enhancement in Acidic solution for Austenitic Stainless Steel by Gas-Phase Hybrid Deposition Process [Volume 35, 8A, 2017, Page 788-794]
Mohammed, F.Q.
Design of Nano-Inhibitor of Dichlorobenzene and It's Adduct and Study of Its Structural and Electronic Properties: DFT Calculations [Volume 35, 8A, 2017, Page 795-800]
Mohammed, H.S.
Intervening of Electrochemical Machining Parameters on Particle Size of ZnO Powder and Metal Removal Rate [Volume 35, 5A, 2017, Page 431-438]
Mohammed, M.S.
Information Hiding Using Geographic Information System (GIS) Vector File [Volume 35, 2B, 2017, Page 182-188]
Mohammed, N.F.
Brazing of Pure Aluminum by Aluminum Silicon Filler Metal Alloys [Volume 35, 2A, 2017, Page 149-154]
Mohammed, R.H.
The Effect of Nanoparticles Additives on Impact Strength of Metal Matrix Composites [Volume 35, 1B, 2017, Page 37-40]
Mohammed, S.
The Effects of Process Parameters on Residual Stresses in Single Point Incremental Forming of A1050 Aluminum Using ANOVA Model [Volume 35, 1A, 2017, Page 41-48]
Mohammed, T.H.
Implementation of Mobile Robot’s Navigation using SLAM based on Cloud Computing [Volume 35, 6A, 2017, Page 634-639]
Mohammed Ali, A.A.
Efficiency Analysis of Healthcare Sector [Volume 35, 5A, 2017, Page 509-515]
Mohmmed, J.H.
Effect of Addition CuO Nanoparticle to Quenching Media on Properties of Medium Carbon Steel [Volume 35, 9A, 2017, Page 894-898]
Mohsein, Z.H.
Variation of Heat Transfer Coefficient for Inside and Outside Closed Space with Respect to Temperature Gradient for Three Different Metals [Volume 35, 5A, 2017, Page 537-545]
M. Saied, Sh.
Mobile Base Program for Drug-Drug Interactions (MBPDDIs) [Volume 35, 1B, 2017, Page 63-67]
Muhi, M.A.
Preparation of Silver Nanoparticles by Chemical Reaction Method at Different Reaction Temperatures and the Study of their Antibacterial Activity [Volume 35, 2B, 2017, Page 189-194]
Muhi Aldain, S.M.
Effects of Ambient Temperature and Needle to Collector Distance on PVA Nanofibers Diameter Obtained From Electrospinning Technique [Volume 35, 4A, 2017, Page 340-347]
Muna M. Khudhair, D.
Preparation of Emulsified Fuel from used lubricating oil [Volume 35, 1C, 2017, Page 261-267]
Musa, B.H.
Diffusion Study of Different Types of Water in Polymer Composite Reinforced with Chicken Feathers Fibers Abstract [Volume 35, 1C, 2017, Page 133-139]
Mustafa, A. M.
Effect of feed rate on laser surface cladding of cold rolled carbon steel [Volume 35, 9A, 2017, Page 922-929]
Mutashar, S.
Design and Analysis of Printed Square Loop Antenna and Solenoidal Loop Antenna for Pill Shaped Bio-implants Object [Volume 35, 1A, 2017, Page 9-15]
N
Nifal, W.
Study Using Different Adsorbents Materials in Purification of Waste Lubricating Oil [Volume 35, 1C, 2017, Page 183-190]
Nifal, Wasan
Preparation of Emulsified Fuel from used lubricating oil [Volume 35, 1C, 2017, Page 261-267]
Noori, M.F.
Study the Effect of Multilayer Single Point Incremental Forming on Tool Path Mark for AA1050 bottom plates [Volume 35, 6A, 2017, Page 648-652]
Noori Ahmed, Rasha
Immunity in Architecture (Analytical study of the design of the environment surrounding the university buildings as an entry point to achieve the security and safety) [Volume 35, 1C, 2017, Page 32-47]
Numan, A.H.
An Experimental Investigation on the Performance Enhancement of Photovoltaic/Thermal Panel Using a Tracking System and Nanofluid (Al 2O3) [Volume 35, 5A, 2017, Page 493-508]
O
Oleiwi, J.K.
Effect of Accelerated Weathering on the Compressive Strength for PMMA Nano Composites and PMMA Hybrids Nano Composites Used in Dental Applications [Volume 35, 3A, 2017, Page 204-215]
Omran, A.A.
Domination and Independence on Square Chessboard [Volume 35, 1B, 2017, Page 68-75]
Owaid, A.J.
The Effect of Speed Smart Control System SSCS on the Performance of Hydropower System [Volume 35, 6A, 2017, Page 602-608]
Q
Qasim, I.A.
Analysis of the Influence of Different EDM Parameters Using Taguchi Technique [Volume 35, 6A, 2017, Page 571-577]
Qasim, M.A.
The Effect of Speed Smart Control System SSCS on the Performance of Hydropower System [Volume 35, 6A, 2017, Page 602-608]
R
Raafat, S.M.
Robust Controller Analysis and Design of Medical Haptic Control System [Volume 35, 4A, 2017, Page 318-326]
Rasheed, L.A.
Numerical and Experimental Investigation of Solar Air Collectors Performance Connected in Series [Volume 35, 3A, 2017, Page 190-196]
Rasheed, L.T.
A Cognitive Nonlinear Fractional Order PID Neural Controller Design for Wheeled Mobile Robot based on Bacterial Foraging Optimization Algorithm [Volume 35, 3A, 2017, Page 289-300]
Rasheed, R.T.
Gas Sensitivity of ITO Composite Prepared by Sol-Gel Method [Volume 35, 10A, 2017, Page 981-986]
Rasin, F.A.
Study the Effects of Nano-Materials Addition on Some Mechanical Properties of Cement Mortar [Volume 35, 4A, 2017, Page 348-355]
Resen, A. M.
Effect of feed rate on laser surface cladding of cold rolled carbon steel [Volume 35, 9A, 2017, Page 922-929]
R. Fafraj, S.
Enhancing Photoelectric Conversion Efficiency of Photovoltaic Panel Using Cooled Water by Evaporation [Volume 35, 5A, 2017, Page 525-531]
R.H. Majed, S.
Barometric Trend in Contemporary Design A Study in Bricks Facades [Volume 35, 1C, 2017, Page 1-17]
Rija, N.H.
Modified Polymer Matrix Nano Biocomposite for Bone Repair and Replacement- Radiological Study [Volume 35, 4A, 2017, Page 365-371]
S
S. Abbas, A.
Investigation Nano coating for Corrosion Protection of Petroleum Pipeline Steel Type A106 Grade B; Theoretical and Practical Study in Iraqi Petroleum Sector [Volume 35, 10A, 2017, Page 1042-1051]
Sabeeh, S.H.
Fabrication of High Purity Copper Nanopowder via Wires Explosion Technique [Volume 35, 8A, 2017, Page 816-820]
Sabeeh, S.H.
Synthesis of Dopant Zno Thin Films with Al Using Dip Coating for Gas Sensors [Volume 35, 8A, 2017, Page 842-844]
Sabhan, M.M.R.
Fabrication of High Purity Copper Nanopowder via Wires Explosion Technique [Volume 35, 8A, 2017, Page 816-820]
Sabti, H.H.
Allegation in Architecture (Modernism Villa Savoy as a Model) [Volume 35, 1C, 2017, Page 18-31]
Safi, H. H.
A Survey Using Kano Model and Road map to issues Standard Model of e-commerce Using SPLE technique [Volume 35, 2B, 2017, Page 132-143]
Sagger, A.A.
High Voltage Gain Impedance-Source Indirect Matrix Converter [Volume 35, 5A, 2017, Page 485-492]
Saleem, F.F.
Experimental Research on Tension Lap Splice in Reactive Powder Concrete Beams Exposed to Repeated Loading [Volume 35, 5A, 2017, Page 479-484]
Saleh, Y.M.
Detection of active compounds in the crude aqueous extract of Annona muricata plant peels and used as an anti-oxidant [Volume 35, 1C, 2017, Page 157-160]
S. AL-Hassani, E.
Mechanical and Physical Properties of Nano Carbon Tube with Carbon Fiber Reinforced with Polyester Resin [Volume 35, 5A, 2017, Page 465-472]
Salih, H.A.
Enhancement of Silicon Solar Cell’s Performance using Plasmonic Ag Nps [Volume 35, 1B, 2017, Page 19-24]
Salih, S.E.
Study the Effect of adding Natural Rubber and Polymethyl Methacrylate to the Epoxy Resin on the Quantitative Analysis and its Mechanical Properties [Volume 35, 2A, 2017, Page 163-171]
Salih, S.I.
Effect of Accelerated Weathering on the Compressive Strength for PMMA Nano Composites and PMMA Hybrids Nano Composites Used in Dental Applications [Volume 35, 3A, 2017, Page 204-215]
Salih, S.I.
Preparation and Characterization of PMMA-HDPE and HDPE-PMMA Binary Polymer Blends [Volume 35, 4A, 2017, Page 311-317]
Salih, S.I.
Corrosion Protection of Carbon Steel by Zn/PPY mCoating as Layers in 3.5% NaCl [Volume 35, 8A, 2017, Page 821-830]
Salih, W.M.
Study the Effect of adding Natural Rubber and Polymethyl Methacrylate to the Epoxy Resin on the Quantitative Analysis and its Mechanical Properties [Volume 35, 2A, 2017, Page 163-171]
Salih, W.M.
Manufacturing of Thermal and Acoustic Insulating from (White Cement and Hemp Short Fibers) by using Recycled Paper [Volume 35, 1C, 2017, Page 172-182]
Salih, W.M.
Anodic Inhibitor Doped Polypyrrole Coating to Reduce Corrosion in Petroleum Medium [Volume 35, 9A, 2017, Page 878-886]
Salim, Ali J.
Design of Fractal- Based Bandstop Filter for Microwave Radiation Leakage Reduction [Volume 35, 1A, 2017, Page 16-23]
Salim, B.M.
Economic Feasibility Study of Modern and Conventional Central Heating Systems for Villa Located in Duhok City, Iraq [Volume 35, 7A, 2017, Page 725-736]
Salim, L.S.
Effect of B4C/Fly Ash Addition on Wear and Mechanical Properties of Al-Cu-Mg Alloy [Volume 35, 4A, 2017, Page 301-310]
Salman, A.D.
Studying The Effect of Nano-Metakaolin Admixture Material On Mechanical Properties of Oil Well Cement (OWC) [Volume 35, 9A, 2017, Page 909-913]
Salman, G.K.
Study of Characterization of Cupper Ferrites Thin Film Prepared by Pulse Laser [Volume 35, 1B, 2017, Page 57-62]
Salman, G.K.
Use of Nano-Magnetic Material for Removal of Heavy Metals from Wastewater [Volume 35, 9A, 2017, Page 903-908]
Salman, M.M.
Performance of Self-Compacting Concrete Containing Pozzolanic Materials in Aggressive Environment [Volume 35, 5A, 2017, Page 439-444]
S. Al-Shathr, B.
Effect of Polypropylene Fibers on Thermal and Some Mechanical Properties of No-fines Concrete [Volume 35, 1A, 2017, Page 76-82]
Sarsam, K.F.
Effect of Shear Span-Depth Ratio on Shear Strength of Porcelanite Lightweight Aggregate Reinforced Concrete Deep Beams Strengthened by Externally Bonded CFRP Strips [Volume 35, 3A, 2017, Page 267-275]
Sayyid, F. F.
Effect of feed rate on laser surface cladding of cold rolled carbon steel [Volume 35, 9A, 2017, Page 922-929]
Shaker, K.S.
Study the Effect of Addition Silver Nanoparticle on Structure and Morphological Properties for PVDF Hollow Fiber [Volume 35, 1B, 2017, Page 33-36]
Shaker, K.S.
Preparation of ZnO like–Nanoflower by Hydrothermal Method [Volume 35, 2B, 2017, Page 178-181]
Shaker, K.S.
Preparation of Silver Nanoparticles by Chemical Reaction Method at Different Reaction Temperatures and the Study of their Antibacterial Activity [Volume 35, 2B, 2017, Page 189-194]
Shaker, S.S.
Study the Effect of Addition Silver Nanoparticle on Structure and Morphological Properties for PVDF Hollow Fiber [Volume 35, 1B, 2017, Page 33-36]
Shaker, S.S.
Study of Characterization of Cupper Ferrites Thin Film Prepared by Pulse Laser [Volume 35, 1B, 2017, Page 57-62]
Shaker, S.S.
Preparation of ZnO like–Nanoflower by Hydrothermal Method [Volume 35, 2B, 2017, Page 178-181]
Shakir, M.A.
Digital Modulation Recognition in Noisy Environment Using a Learning Machine [Volume 35, 6A, 2017, Page 624-633]
Shather, S.K.
Intervening of Electrochemical Machining Parameters on Particle Size of ZnO Powder and Metal Removal Rate [Volume 35, 5A, 2017, Page 431-438]
Shather, S.K.
Influence of EDM Parameters on the Appearance of Recast Layer [Volume 35, 7A, 2017, Page 694-700]
Shehab, J.N.
ARDUINO Microcontroller Based Building Security System [Volume 35, 5A, 2017, Page 532-536]
Shihab, S.K.
Exploring the Effect of Dimensional Tolerance of the Inserts During Multi-Objective Optimization of Face Hard Milling Using Genetic Algorithm [Volume 35, 4A, 2017, Page 381-390]
S. Jabir, M.
A study of kidney Parameters Induced by Porous Silicon Nanoparticles [Volume 35, 2B, 2017, Page 150-153]
S. Rida, K.
Spectroscopic Characteristics For Rhodamine C Tincture in Diverse Solvents [Volume 35, 2B, 2017, Page 161-165]
S. Shaker, Kh.
Synthesis Nano Zinc Oxide Materials and Their Activity on Fungus Growth [Volume 35, 1B, 2017, Page 76-84]
Subhi, M.
Mechanical and Physical Properties of Nano Carbon Tube with Carbon Fiber Reinforced with Polyester Resin [Volume 35, 5A, 2017, Page 465-472]
Subhi, M.D.
Mechanical Properties of Fiberous High Performance Lightweight Aggregate Concrete [Volume 35, 3A, 2017, Page 229-238]
Sukkar, K.A.
Manufacturing of Bi-functional Nano-sensor of Nobel Metal for Hydrocarbon Gas Detection in Petroleum Sector Using Pulse Laser Deposition Technique [Volume 35, 8A, 2017, Page 864-871]
Sukkar, K.A.
Improve the Process of Enhancing Oil Recovery (EOR) by Applying Nanomagnetic Cobalt Ferrite Nanoparticles [Volume 35, 9A, 2017, Page 872-877]
Sultan, K.F.
Numerical and Experimental Investigation of Solar Air Collectors Performance Connected in Series [Volume 35, 3A, 2017, Page 190-196]
Sultan, K.F.
Controlling for Boiler in Thermal Power Plants by Using Fuzzy Logic Controller [Volume 35, 7A, 2017, Page 717-724]
T
Taha, J.M.
Effect of laser surface treatment on the some of mechanical properties of AISI 4130 steel [Volume 35, 2B, 2017, Page 85-90]
Talia, A.M.
Effect of Accelerated Weathering on the Compressive Strength for PMMA Nano Composites and PMMA Hybrids Nano Composites Used in Dental Applications [Volume 35, 3A, 2017, Page 204-215]
Talip Jafar, Aqeel
Preparation of Emulsified Fuel from used lubricating oil [Volume 35, 1C, 2017, Page 261-267]
Thamer, I.
Updating Cadastral Maps using GIS Techniques [Volume 35, 3A, 2017, Page 246-253]
Thamir, A. D.
Synthesis and Study of Modified Nanostructure Porous Silicon Layers for Chemical Gas Sensing [Volume 35, 10A, 2017, Page 970-974]
Thamir, A.D.
Titanium-Base Nanostructure Coatings for AISI M52 Tool Steel by Gas-Phase Mix Process [Volume 35, 3A, 2017, Page 182-189]
Thamir, A.D.
Corrosion Resistance Enhancement in Acidic solution for Austenitic Stainless Steel by Gas-Phase Hybrid Deposition Process [Volume 35, 8A, 2017, Page 788-794]
Thamir, A.D.
Design of Nano-Inhibitor of Dichlorobenzene and It's Adduct and Study of Its Structural and Electronic Properties: DFT Calculations [Volume 35, 8A, 2017, Page 795-800]
Thamir, A.D.
Improve the Process of Enhancing Oil Recovery (EOR) by Applying Nanomagnetic Cobalt Ferrite Nanoparticles [Volume 35, 9A, 2017, Page 872-877]
Thuaban, L. H.
Preparation of a Reinforced Polymeric Coating with Inorganic Nano Additives as UV-Stabilizers and Protect Oil Pipelines from Corrosion [Volume 35, 10A, 2017, Page 1003-1010]
T. Maolood, A.
An Effective Preprocessing Step Algorithm in Text Mining Application [Volume 35, 2B, 2017, Page 126-131]
W
Wasmi, M.H.
Comparative Study of Bearing Loads for Open Ended Pipe and H-Piles in Sandy Soil [Volume 35, 6A, 2017, Page 593-601]
Watan, A.W.
Study of the Diffusion Coefficient and Hardness for a Composite Material when Immersed in Different Solutions Polymer [Volume 35, 1C, 2017, Page 191-196]
Y
Y. Abed, H.
Improvement the Chemical Resistance of Furnaces Bricks for Petroleum Refineries by ZrO2-Nano- Glass-Ceramic Coated [Volume 35, 10A, 2017, Page 999-1002]
Yas, H. M.
Preparation Nano Composite Material Used in Oil and Gas Pipelines [Volume 35, 9A, 2017, Page 950-955]
Yas, H. M.
Preparation of a Reinforced Polymeric Coating with Inorganic Nano Additives as UV-Stabilizers and Protect Oil Pipelines from Corrosion [Volume 35, 10A, 2017, Page 1003-1010]
Yaseen, N.Y.
Detection of active compounds in the crude aqueous extract of Annona muricata plant peels and used as an anti-oxidant [Volume 35, 1C, 2017, Page 157-160]
Yassen, M.T.
A New Compact Dual-band Antenna Based on Sierpinski Curve Slotted Ground Plane and Current Distribution Analysis [Volume 35, 4A, 2017, Page 406-410]
Younis, F.M.
Economic Feasibility Study of Modern and Conventional Central Heating Systems for Villa Located in Duhok City, Iraq [Volume 35, 7A, 2017, Page 725-736]
Yousif, B.A.
Diffusion Study of Different Types of Water in Polymer Composite Reinforced with Chicken Feathers Fibers Abstract [Volume 35, 1C, 2017, Page 133-139]
Yousif, N.Q.
A Cognitive Nonlinear Trajectory Tracking Controller Design for Wheeled Mobile Robot based on Hybrid Bees-PSO Algorithm [Volume 35, 6A, 2017, Page 609-616]
Z
Zaidan, S.A.
Effect Nano-SiC Additives on Physical and Mechanical Properties of Bauxite Refractories Used in Oil Treatment Units [Volume 35, 10A, 2017, Page 992-998]
Zaidan, S.A.
Improvement the Chemical Resistance of Furnaces Bricks for Petroleum Refineries by ZrO2-Nano- Glass-Ceramic Coated [Volume 35, 10A, 2017, Page 999-1002]
Z. Alsandooq, Gh.
Alumina Nanoparticle/Polypyrrole Coating for Carbon Steel Protection in Simulated Soil Solution [Volume 35, 9A, 2017, Page 943-949]
Zedan, A.J.
Seepage Analysis through an Earth Dam (KHASA-CHAI Dam) as a Case Study [Volume 35, 2A, 2017, Page 172-181]
Z. Farge, T.
Experimental Study of the Performance Water Distillation Device by Using Solar Energy [Volume 35, 6A, 2017, Page 653-659]
Zghair, L.A.
Performance of Self-Compacting Concrete Containing Pozzolanic Materials in Aggressive Environment [Volume 35, 5A, 2017, Page 439-444]